Inordertoexploretheeffectofwasterubberontheabrasionresistanceofpervi-ous concrete， high strength pervious concrete was produced by adding waste rubber part i-cles， and its basic physical and mechanicalproperties were tested， The Cantab ro abrasiontest was used to test the change rule of mass loss rate with the content of rubber particlesand particle size before and after abrasion.The testresults show that：Waste rubber particlehas obvious influence on the compressive strength， porosity and permeability of PC， and theinfluence rule is related to the type and content of admixture.The compressive strength ofPC mixed with waste rubber decreases obviously， and the compressive strength of PC with9%rubber particles decreases most obviously.The porosity of PC with fine crumb rubberdecreases gradually， while the porosity of PC with crumb rubber increases obviously.Wasterubber particle also has a great influence on the abrasion resistance of PC.Compared withthe control group， the abrasion resistance of PC with rubber content of 3%and 6%in-crease obviously， while the abrasion resistance of PC with rubber content of 9%decrease ob-viously.The influence of rubber particle size on abrasion resistance of PC is not very differ-ent.Thereisnonecessaryrelationship_betweenabrasionresistance andstrength of PCmixed with waste rubber particle.